Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Inwood
If your registers are puffing dust or your bathroom fan barely pulls, the problem is often in the ductwork, not the vent cover. We handle duct repair and sealing across Inwood, from the six-story brick co-ops along Broadway and Seaman Avenue to the high-rises at Park Terrace Gardens and the Inwood Houses. This is dense, vertical housing, and much of what we do here is shared-stack work, not a single-apartment service call. Call (855) 658-4077 and we’ll take a look.
Why Inwood Homeowners Call Air Duct Cleaning Kingsbridge for Duct Repair & Sealing
Our technicians have up to 9 years of experience, and in this part of upper Manhattan that experience tends to get used on risers, chases and dropped ceilings more than on single-family runs. We know how these buildings are put together: the Broadway corridor’s pre-war elevator co-ops, the mid-century complexes like Park Terrace Gardens, and the smaller detached and semi-detached homes on the hilly side streets west of Broadway. That matters when a fix scoped for one unit has to hold up under a co-op board’s review.
We work with professional-grade equipment, including Rotobrush and Nikro systems for debris extraction and inspection, and Abatement Technologies air filtration and containment gear when a job calls for contamination control. That means we can show you what we find before we touch a joint. Clean ducts, sealed ducts: the cleaning and the repair go together, especially in a stack shared by dozens of apartments.
Response time to Inwood is straightforward. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Every job is priced per system on a written estimate agreed before work starts, so there is no surprise on the invoice. We also bring before-and-after photos of your own ducts so you can see the work that was done.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Inwood
Our duct repair & sealing work in Inwood leans heavily on three things: mastic sealant, metal duct repair and flex duct repair. Here’s how each one plays out in these buildings.
Mastic Sealant
Mastic sealant is the brush-applied coating that closes the seams, joints and pinholes in metal ductwork, and it’s the workhorse for pre-war trunk and riser systems. In Inwood’s older stacks, sealant is what stops cross-unit leakage at a joint that has pulled apart behind a wall chase. We coat the joints evenly so the supply and return path holds static pressure.

Metal Duct Repair
Metal duct repair addresses the separated riser joints and failing seams that are common in the six-story brick buildings along Broadway and Seaman Avenue. When a joint behind a wall chase has opened, patching a register in one apartment won’t fix it; the metal itself has to be resealed or reconnected. We open the section, repair it and close it back up.

Flex Duct Repair
Flex duct repair targets the crushed, kinked or disconnected runs above dropped ceilings and inside soffits, which is where a lot of stale air and dust gets trapped in these high-rises. A neighbor’s renovation can crush a flex run in a shared soffit and leave the dust to settle into it. We reconnect or replace the run so air actually reaches the register.

Duct Insulation
Duct insulation goes back on top of the repair, and it matters more here than in most places. Cold, windy winters and humid summers in Inwood keep heating and window or portable AC running hard, and that condensation cycling inside older metal ducts causes problems. Properly insulated runs cut the sweating and the heat loss.
Trusted Brands We Service in Inwood
We fold recognized air quality brands into our work where they fit. Honeywell and Aprilaire filtration and humidity equipment show up often in these buildings, and Guardsman products are part of our sanitizing and treatment standard. We don’t stock parts locally or claim a warehouse; when a job needs a component, we tell you what it is and work it into the written estimate. Our heavy equipment is Rotobrush, Nikro and Abatement Technologies, which is what lets us inspect and repair a run properly rather than just clean around the problem. One call covers the whole system.
Common Duct Repair & Sealing Problems We See in Inwood Homes
This is where Inwood is genuinely different from most of Manhattan. These buildings were plumbed and ducted with shared vertical exhaust risers, so a duct repair in one apartment often means opening and resealing the same stack in multiple units. That scope has to be approved by a co-op board or managing agent before anyone climbs a ladder, and nowhere else in Manhattan is the duct-repair unit of work so often a whole riser rather than a single apartment.
- Separated riser joints behind wall chases. In pre-war stacks, joints pull apart over time, so sealing one apartment’s registers won’t stop leakage from the unit above. The whole stack typically has to be addressed as one job.
- Crushed or disconnected flex duct in dropped ceilings. A neighbor’s renovation can crush a flex run in a shared soffit and leave dust to settle into it building-wide. The fix is to restore the run so static pressure holds across every register.
- Shared bathroom and kitchen exhaust risers. These run vertically through the building. A repair scoped to a single unit often fails co-op board review because the rest of the stack was never touched.
- Condensation cycling in older metal ducts. Inwood’s cold winters and humid summers push heavy heating and window-AC use, and that cycling feeds buildup tenants notice most in spring allergy season and when the heat first kicks on.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Inwood, NY
We price per job on a written estimate, not per vent, so you know the number before work starts. Typical estimates for Inwood’s market:
| Service | Typical Inwood Estimate |
|---|---|
| Mastic sealant on a single trunk or short run | $375 – $625 |
| Metal duct repair of a separated joint | $425 – $800 |
| Flex duct repair or replacement of one run | $300 – $650 |
| Duct insulation on repaired sections | $350 – $700 |
| Multi-unit riser scope (board-approved) | Quoted per stack |
What moves the number: how many apartments share the riser, whether the ceiling is finished, how far the run is from an access point, and whether building access coordination is required. A written estimate sets the final price. Estimates are free.
We Also Serve Cities Near Inwood
We work across the northern tip of Manhattan and into the neighborhoods around it, including University Heights, Kingsbridge, Spuyten Duyvil and Washington Heights. If you’re east of the Harlem River or south toward the Cloisters side, we can still get to you. Call and we’ll confirm coverage for your building.
Serving Inwood, NY – Our Local Coverage Area
We serve Inwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Inwood
A shared-riser proposal should cover every unit the stack serves, not just the one that filed the complaint. In Inwood’s pre-war buildings a joint that fails in one apartment usually means the same joint is failing above or below. Your proposal should list the units to be accessed, the inspection findings from each, the mastic sealant or metal repair to be applied, how containment and HEPA filtration will protect occupied units, and the sequence for moving through apartments with the managing agent. The written estimate sets the final price, and estimates are free. Call (855) 658-4077 to start the walkthrough.
Dust returning right after cleaning usually means the ducts weren’t sealed, not that cleaning failed. In a Seaman Avenue co-op the supply or exhaust stack is likely pulling dust from an adjacent unit or a wall chase through an open joint. Cleaning removes the debris; sealing the joints is what keeps it from coming back. Clean ducts, sealed ducts. Call (855) 658-4077 for an exact quote.
Yes, high-rise work in Inwood almost always needs building access coordination. Lobby access, freight elevator booking, working hours and unit-by-unit scheduling are typically set by the managing agent, and a repair to a shared run may need several apartments opened on the same visit. We work the schedule through your building manager so the work isn’t half-finished. Call (855) 658-4077 to talk scope.
Yes, if the sealing avoids the lint path itself. On a shared stack, sealing is about closing the gaps around the duct, not plugging the duct. We keep the exhaust passage clear, seal the surrounding seams, and confirm airflow draws properly. Call (855) 658-4077 for an exact quote.
A camera inspection tells you: if the dust is coming through an open joint or a disconnected flex run, it’s an air leak problem, and cleaning alone won’t fix it. If the duct is sound and just loaded with debris, cleaning is the answer. We inspect first and show you what we find. Call (855) 658-4077 and we’ll schedule an inspection and estimate.
Get Your Duct Repair & Sealing Estimate in Inwood
If your registers are dusty, your bathroom fan won’t draw, or your co-op board needs a scope for a shared riser, call us. We’ll inspect, explain what we find, and give you a flat price per system on a written estimate before work starts. Call (855) 658-4077 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Kingsbridge.